|
Technical Parameter |
Unit |
ZHV200TR3 |
|||
|
A |
B |
||||
|
Injection Unit |
Screw Diameter |
mm |
45 |
50 |
|
|
Theoretical Injection Volume |
OZ |
12.1 |
15 |
||
|
Injection Capacity |
g |
316 |
390 |
||
|
Injection Pressure |
MPa |
218 |
117 |
||
|
Screw Rotation Speed |
rpm |
0-300 |
|||
|
Clamping Unit
|
Clamping Force |
KN |
2000 |
||
|
Toggle Stroke |
mm |
350 |
|||
|
Tie Rod Spacing |
mm |
-- |
|||
|
Max.Opening Stroke |
mm |
700 |
|||
|
Min.Mold Thickness |
mm |
350 |
|||
|
(L*W) Max. Mold Size |
mm |
500*600 |
|||
|
Turntable Size |
mm |
∅ 1590 |
|||
|
Ejection Stroke |
mm |
150 |
|||
|
Ejector Force |
KN |
61.8 |
|||
|
Others |
Thimble Root Number |
pcs |
3 |
||
|
Max. Pump Pressure |
Mpa |
14 |
|||
|
Pump Motor Power |
KW |
39.7 |
|||
|
Electrothermal Power |
KW |
13.8 |
|||
|
Machine Dimensions |
L*W |
mm |
3176*2465 |
||
|
H |
mm |
4205(5295) |
|||
|
Machine Weight |
T |
14 |
|||
Injection molding machines can produce a variety of plastic-coated aluminum parts, including but not limited to:
Plastic-clad aluminum housing: This is a major component of many electronic devices and protects internal circuit boards and other sensitive components.
Plastic-coated aluminum interfaces: These interfaces are usually used to connect electronic devices and other devices, such as USB interfaces, HDMI interfaces, etc.
Plastic-coated aluminum buttons: Buttons on many electronic devices are made of plastic-coated aluminum, such as TV remote controls, calculators, and so on.
Plastic-coated aluminum fasteners: These fasteners are usually used to fix various parts of electronic equipment, such as screws, fasteners, etc.
Plastic coated aluminum heat sink: These heat sinks are usually used for the heat dissipation of electronic devices, such as computers, televisions, etc.
| Hydraulic and pneumatic components: | |||
|
Solenoid Valve |
YUKEN(TAIWAN) |
Oil Pump |
SUMITOMO(Japan) |
|
Oil Motor |
INTERMOT |
Oil seal |
NOK(Japan) or Italian oil seal |
