|
Technical Parameter |
Unit |
ZH-218T |
|||
|
A |
B |
C |
|||
|
Injection Unit |
Screw Diameter |
mm |
45 |
50 |
55 |
|
Theoretical Injection Volume |
OZ |
13.7 |
17 |
20 |
|
|
Injection Capacity |
g |
317 |
361 |
470 |
|
|
Injection Pressure |
MPa |
220 |
180 |
148 |
|
|
Screw Rotation Speed |
rpm |
0-180 |
|||
|
Clamping Unit
|
Clamping Force |
KN |
2180 |
||
|
Toggle Stroke |
mm |
460 |
|||
|
Tie Rod Spacing |
mm |
510*510 |
|||
|
Max.Mold Thickness |
mm |
550 |
|||
|
Min.Mold Thickness |
mm |
220 |
|||
|
Ejection Stroke |
mm |
120 |
|||
|
Ejector Force |
KN |
60 |
|||
|
Thimble Root Number |
pcs |
5 |
|||
|
Others
|
Max. Pump Pressure |
Mpa |
16 |
||
|
Pump Motor Power |
KW |
22 |
|||
|
Electrothermal Power |
KW |
13 |
|||
|
Machine Dimensions (L*W*H) |
M |
5.4*1.2*1.9 |
|||
|
Machine Weight |
T |
7.2 |
|||
The injection molding machine can produce the following spare parts for magnetic chargers:
Shell: The outer protective shell of the magnetic charger, usually made of plastic material injection molding, including various parts of the shell and the connection port.
Charging base: The base part of the magnetic charger, used to receive charging equipment and provide power connection and charging functions. Charging docks are usually injection molded from plastic material.
Magnetic part: The magnetic charger is used to connect the adsorption part of the charging device. It is usually injection molded from plastic materials and has strong magnetic force and adsorption stability.
Cable: The power connection cable of the magnetic charger, used to connect the charging base and the power outlet, is usually injection molded from plastic materials for durability and electrical performance.
Control button: The control button on the magnetic charger is used to operate the switch, charging mode, etc. of the charging device. It is usually injection molded from plastic materials and has durability and controllability.
LED indicator light: The LED light on the magnetic charger is used to indicate charging status, power and other information. It is usually injection molded from plastic materials and has brightness and reliability.
| Hydraulic and pneumatic components: | |||
|
Solenoid Valve |
YUKEN(TAIWAN) |
Oil Pump |
SUMITOMO(Japan) |
|
Oil Motor |
INTERMOT |
Oil seal |
NOK(Japan) or Italian oil seal |
