|
Technical Parameter |
Unit |
ZH-128T |
|||
|
A |
B |
C |
|||
|
Injection Unit |
Screw Diameter |
mm |
36 |
40 |
45 |
|
Theoretical Injection Volume |
OZ |
6.8 |
8 |
10 |
|
|
Injection Capacity |
g |
152 |
188 |
238 |
|
|
Injection Pressure |
MPa |
245 |
208 |
265 |
|
|
Screw Rotation Speed |
rpm |
0-180 |
|||
|
Clamping Unit
|
Clamping Force |
KN |
1280 |
||
|
Toggle Stroke |
mm |
340 |
|||
|
Tie Rod Spacing |
mm |
410*410 |
|||
|
Max.Mold Thickness |
mm |
420 |
|||
|
Min.Mold Thickness |
mm |
150 |
|||
|
Ejection Stroke |
mm |
90 |
|||
|
Ejector Force |
KN |
27.5 |
|||
|
Thimble Root Number |
pcs |
5 |
|||
|
Others
|
Max. Pump Pressure |
Mpa |
16 |
||
|
Pump Motor Power |
KW |
15 |
|||
|
Electrothermal Power |
KW |
7.2 |
|||
|
Machine Dimensions (L*W*H) |
M |
4.2*1.14*1.7 |
|||
|
Machine Weight |
T |
4.2 |
|||
The injection molding machine can produce spare parts for balloon inflators including but not limited to the following parts:
Cylinder: The main part of the inflatable cylinder, which is usually injection molded by an injection molding machine.
Plug: used to close one end of the inflatable cylinder to prevent gas leakage. It is also injection molded.
Piston: The component used to push air into the inflatable cylinder, usually injection molded by an injection molding machine.
Sealing ring: Installed between the inflatable cylinder body and the plug to ensure sealing during inflation. It is usually a rubber product and can be injection molded by an injection molding machine or purchased outsourced.
Other accessories: such as connecting pipes, valves, etc., used to connect the inflatable cylinder and other equipment. These accessories are usually purchased rather than produced by the injection molding machine.
| Hydraulic and pneumatic components: | |||
|
Solenoid Valve |
YUKEN(TAIWAN) |
Oil Pump |
SUMITOMO(Japan) |
|
Oil Motor |
INTERMOT |
Oil seal |
NOK(Japan) or Italian oil seal |
